ADT® Authorized Dealer Serving West Bloomfield & Surrounding Areas
close up of a lady adjusting the security panel
March 07, 2022

How To Reset Your Security System In West Bloomfield

An important advantage of getting your home security system installed by professionals is that you hardly ever have to concern yourself with it. However, there will likely be times when you need to reset your alarms in West Bloomfield. When using the ADT Command panel, your system reset usually takes one or two button tap after common events like false alarms and battery changes.

Check Your Instruction Manual Before Resetting Your Alarm

One note of caution before you start resetting your West Bloomfield home security system, consult your manual first. You’ll never want to undermine your home’s protection due to pressing the wrong button. In addition, the process may have changed if you upgraded from a numerical keypad to a digital command hub. Keep in mind that if you’re struggling to reset your system, don't be reluctant to contact the professionals.

Resetting Your West Bloomfield Home Security System Due To A False Alarm

Usually, a false alarm occurs because of a sensor that was tripped by accident. You are able to engage the control panel or open your ADT security app and hit the shield option and type in your security code to deactivate the alarms in these situations. You could get a call from your 24-hour monitoring specialists, but just tell them you had a false alarm.

Tips To Reset Your Alarm When Experiencing A Power Outage In West Bloomfield

If power is lost from lighting, strong winds, or other reasons, you may start hearing a repeated, high-pitched beep from your control panel. That indicates that your home’s defense is using the backup battery. To reset the alarm and stop the beeping, you must take steps to disarm and rearm your security.

But please note, if your power outage lasts for a longer period of time, you could need a total reset of your system. Follow the directives in your user’s handbook -- typically by submitting your code and hitting the on/off button two times -- and you should be back to normal. You might still hear chirps from the backup power, as it may not cease until the battery charges entirely. Reach out to your home security agent if you continue to have difficulties with your ADT controls 20 hours after power is restored.

Reset Your Home Security System After Replacing A Battery

Occasionally you will have to replace a battery within one of your home security components. To do this, you should change your system to test mode so you avoid triggering a false alarm. When the you replace the old battery, change the alarm from Test Mode and restore normal operations. If the control panel fails to notice the component or the battery icon remains on, you might have to perform a full reset of your security system.

Resetting Your West Bloomfield Security System Following The Addition Or Deletion Of A Code

Adding and deleting personal codes can be accomplished on the ADT Command panel and your ADT smartphone app. You should never require a resetting of your system when deleting or adding a user or code. However, if you relocate to a new house that already has an ADT alarm system, you'll want to contact your residential security experts at (248) 266-4039 to establish a new plan. The technician will come out and replace components, place more devices (as required), and do a factory reset.

An Easy-To-Use Security System Can Be Yours Today

Attempting to reset a home security system in West Bloomfield will likely be frustrating if it doesn’t have user-friendly equipment and instructions. If the time has come to get your functional and powerful home protection system, contact (248) 266-4039 or complete the form below. Our specialists are pleased to design the perfect security system for your property.