Categories

System hiccups and false alarms can be aggravating, and even worse, may prevent your home’s security from working how it should. Luckily, most problems, from dead batteries to false alarms, are simple to correct. Take a look at our tips for troubleshooting your home alarm system in West Bloomfield. We’ll help you keep your family safeguarded and your system running smoothly.

Test Your Home Security System In West Bloomfield

One sensible way to troubleshoot your home’s security is to test it! Newer systems have a test mode so you don’t mistakenly prompt an emergency call. Once in test mode, follow these steps:

• Activate your system as you normally would when you leave.
• Open a window or door that has a contact sensor, or try to trigger another device. Shut the door or window once you’re done so it doesn’t trip the alarm when you leave test mode.
• Allow the alarm to sound for 60 seconds to make sure a signal is delivered to the security company and an entry is made in the alarm system log.
• Continue testing devices as you wish
• Inspect the alarm’s activity log to verify functionality.

Rest assured, monitoring agents can see that your alarm system is involved in a test. Just make sure to switch out of test mode when you’re done. It’s smart to test once a month or anytime you change your home’s internet or phone service.

Inspect The Positioning And State Of Motion Sensors

Although an integral element of your alarm system, motion sensors are well known for false alarms. Prevent them with a few simple troubleshooting steps.

• Conduct a visual check. Are there items that could shift within the path of the sensor, like a curtain taken by a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and debris can lead to poor performance. Make sure the face is clean.
• Does the motion detector offer pet immunity you can turn on? Some sensors can be programmed to ignore pets weighing as much as 100 pounds.
• When was the battery changed? A low battery might impact performance or cause false alarms.
• Is the sensor aimed toward a source of heat? Excess heat from a fireplace, direct sun, or something else can trigger an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Notifications

One helpful perk of the latest home security systems is that they’ll alert you when batteries are dying. If your system has a control panel or mobile app, you’ll typically see alerts there. Depending on the alarm, you might notice an intermittent beep when batteries are getting low. 

Motion detectors, smoke detectors, contact sensors, and other wireless components have batteries that need to be replaced every year or two. It’s best to keep batteries ready and create a replacement schedule. Many systems also have a backup battery for the main control panel. This backup helps keep your system running if your power goes out and should recharge itself once power is back online. If it doesn’t recharge, you will need to replace it.

Troubleshooting Is Simple With ADT Home Security In West Bloomfield 

As the foremost name in home security, ADT designs systems that supply unsurpassed functionality and convenience. Accessing test mode is simple through MyADT.com or the ADT+ app, and you’ll always receive alerts when a sensor battery is nearing depletion. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system ideal for your West Bloomfield home and family. Place a call to (248) 266-4039 or submit our form today!